NA7-26 Ruwac Japan Sales
If you are looking for a reliable supplier where you can purchase the NA7-26 Wet separator zone 22, labeling according to Atex II 3D for separating powder residues in a liquid, you are in the right place. YUSAKI AUTOMATION LLC sells in the Japan marketRuwac all product groups belonging to the brand, with fast delivery times and competitive prices.
Technical Specification
84079_A
Drive type: alternating current Motor power: 2.60 kW/2.89 kW Voltage: 230 V/240 V Current consumption: 11.9 A/12.3 A Frequency: 50 Hz/60 Hz Degree of protection: IP5X Housing type: sheet steel Coating: RAL 3000/ RAL 9006 Sound level: 68 dB (A) according to DIN 45635-1 KL3 Air output: 220 m³/h negative pressure: -160 mbar/ short-term -210 mbar Draught air valve: yes Degassing valve: yes Vacuum monitoring: yes Differential pressure monitoring: yes Filter type: cartridge Filter category: H Moisture filter: yes/removable Liquid reservoir: stainless steel, RAL9006 coated, removable, incl. flat slide DN-50 as a safety device Liquid volume: 7 liters Swirling screen: sieve combination/removable Suction connection: 50 mm inner diameter Empty weight: 98 kg control: Motor power: 2.60 kW Rated voltage: 1x230 volts Level monitoring: proximity switch off Feed in interface: Harting plug 2 pole+PE without connection cable Ex zone definition Installation location of the vacuum cleaner: ATEX Zone 22 Ex zone to be sucked out of: Ex zone 22 Suction material properties Dry yes Abrasive Yes Combustible Yes, minimum ignition energy > 3mJ dust class H, maximum flow rate < 0.005%, AGW < 0.1 mg/m³ and carcinogenic substances Moist/liquid No Hygroscopic no Auto-flammable/reactive No